Rear Axle
#0051HUNTER
Rear brake drum lever dust covers (Hunter)
Dust covers for the rear drum brake levers, Arrow series Hillman Hunter from 1973 .. .. more info
£5.52 Ex Tax: £4.60
#0051MINX
Rear brake drum lever dust covers (MINX)
Dust covers for the rear drum brake levers.. .. more info
£15.00 Ex Tax: £12.50
#0113
Minilite alloy wheels
Set of 4 Minilite alloy wheels complete with wheel nuts and centre caps, available in 13, 14 an.. .. more info
Please contact us for a quote
#0139
Panhard rod bush set
4 rubber bushes for the Tiger panhard rod. Do not over tighten the adjuster... .. more info
£36.24 Ex Tax: £30.20
#0139B
Panhard rod axle bracket
Reproduction axle bracket for the Tiger Panhard rod.. .. more info
£19.20 Ex Tax: £16.00
#0191CP
Leaf spring clamp plates
5/16 inch thick leaf-spring clamp plates (with notches to help with alignment).. .. more info
£26.40 Ex Tax: £22.00
#0191LP
Leaf spring location plates
Stainless steel leaf-spring location plates (fit between spring and clamp plate).. .. more info
£16.80 Ex Tax: £14.00
#0191U
Leaf spring u-bolts (long)
Extra long leaf-spring u-bolts (can be cut down to suit) with nylocs and washers.. .. more info
£32.40 Ex Tax: £27.00
#0198T
Prop-shaft UJs (pair)
Pair of heavy duty universal joints for (standard) Tiger propshaft.. .. more info
£26.40 Ex Tax: £22.00
#0266
Wheel studs (pack of 4)
Standard length 7/16 wheel studs.. .. more info
£14.40 Ex Tax: £12.00
#0266HD
Heavy duty wheel studs (pack of 4)
Standard length 7/16 wheel studs, heavy duty (hub stud holes will need to be drilled out to 1/2 inc.. .. more info
£9.60 Ex Tax: £8.00
#0266L
Heavy duty long wheel studs (pack of 4)
1 inch longer (55mm) wheel studs (7/16 UNF), heavy duty (hub stud holes will need to be drilled out .. .. more info
£11.40 Ex Tax: £9.50
#0292R
Rear brake hose (stainless braided)
Stainless steel braided quality brake hose.. .. more info
£12.60 Ex Tax: £10.50
#0382T
Differential gasket (Tiger)
Differential gasket (Tiger).. .. more info
£5.40 Ex Tax: £4.50
#0382TBEARING
Differential carrier bearings (Tiger)
Case carrier bearings for the DANA 44 differential.. .. more info
£98.40 Ex Tax: £82.00
#0382TBOLTS
Crown wheel bolts (Tiger)
Crown wheel bolts for the DANA 44 differential.. .. more info
£32.40 Ex Tax: £27.00
#0382TLOCKS
Crown wheel locking tabs (Tiger)
Crown wheel locking tabs for the DANA 44 differential.. .. more info
£14.40 Ex Tax: £12.00
#0382TTW
Differential gear thrust washer set (Tiger)
2 cupped thrust washers for the planetary gears and 2 flat thrust washers for the carrier DANA 44 di.. .. more info
£85.20 Ex Tax: £71.00
#0383ARROW
Pinion seal (Arrow)
Rear axle pinion seal for Arrow based vehicles, OD = 2.38 in, ID = 1.50 in.. .. more info
£7.80 Ex Tax: £6.50
#0383MINX
Pinion seal (Minx)
Rear axle pinion seal for the earlier Hillman Minx, Husky and Sunbeam Rapier, OD = 2.885 in, ID = 1... .. more info
£7.80 Ex Tax: £6.50
#0383NUT
Pinion Nut
Rear axle pinion flange nut, 5/8-18 UNF.. .. more info
£5.40 Ex Tax: £4.50
#0383S1
Pinion seal (early)
Rear axle pinion seal for earlier axles, OD = 2.566 in, ID = 1.5 in.. .. more info
£8.40 Ex Tax: £7.00
#0383S5
Pinion seal (late)
Pinion seal for the later rear axles, OD = 2.379 in, ID = 1.5 inHillman Minx from Chassis number B00.. .. more info
£7.20 Ex Tax: £6.00
#0383SHIM-005
Pinion shim (5 thou)
Pinion bearing pre-load shim - 0.005.. .. more info
£1.20 Ex Tax: £1.00
#0383SHIM-010
Pinion shim (10 thou)
Pinion bearing pre-load shim - 0.010.. .. more info
Use 2 x #0383SHIM-005
#0383SHIM-020
Pinion shim (20 thou)
Pinion bearing pre-load shim - 0.020.. .. more info
£1.20 Ex Tax: £1.00
#0383T
Pinion seal (Tiger)
Axle pinion seal for Tiger.. .. more info
£14.40 Ex Tax: £12.00
#0383TIP
Inner pinion bearing (Tiger)
The larger inner pinion bearing for the DANA 44 axle.. .. more info
£42.00 Ex Tax: £35.00
#0383TOP
Outer pinion bearing (Tiger)
The smaller outer pinion bearing for the DANA 44 axle.. .. more info
£42.00 Ex Tax: £35.00
#0384AW
Rear hub washers (3/4)
3/4 inch rear axle heavy duty hub washers.. .. more info
£1.80 Ex Tax: £1.50
#0384KEY
Half-shaft axle hub key
Woodruff key for rear axle.. .. more info
£4.20 Ex Tax: £3.50
#0384NUT
Rear hub nuts
3/4 inch UNF rear axle hub nuts, machined down to 5/8 inch total height.. .. more info
£10.20 Ex Tax: £8.50
#0384S1
Rear hub bearing (early)
Hub bearing for the earlier design rear axles, no oil seal.. .. more info
£34.80 Ex Tax: £29.00
#0384S5
Rear hub bearing (sealed)
Sealed hub bearing for later rear axles.. .. more info
£37.20 Ex Tax: £31.00
#0384SHIM10
Rear hub bearing shim (10 thou)
10 thou shim for the rear bearing to take-up any play to the back-plate.. .. more info
£4.20 Ex Tax: £3.50
#0384SHIM20
Rear hub bearing shim (20 thou)
20 thou shim for the rear bearing to take-up any play to the back-plate.. .. more info
£4.20 Ex Tax: £3.50
#0384T
Rear hub bearing (Tiger)
Rear axle hub bearing for Tiger Mk1 and 2.. .. more info
£27.60 Ex Tax: £23.00
#0384TKEY
Half-shaft axle hub key (Tiger)
Woodruff key for rear axle of the Sunbeam Tiger (4HA).. .. more info
£16.20 Ex Tax: £13.50
#0384TNUTS
Rear hub nuts (Tiger)
Castellated nuts for rear axle hubs on DANA 44 axle.. .. more info
£14.40 Ex Tax: £12.00
#0384TW
Rear hub washers (7/8)
7/8 inch rear axle half-shaft hub nut washers for DANA 44 axle.. .. more info
£5.40 Ex Tax: £4.50
#0385S1
Rear hub seal
Hub seal for earlier axles without sealled bearings.. .. more info
£4.68 Ex Tax: £3.90
#0386
Rear axle inner seal (Tiger)
Rear axle inner seal for Tiger.. .. more info
£18.60 Ex Tax: £15.50
#0386SG
Rear axle oil splash guard
Inner oil splash guard for rear axle shaft bearings.. .. more info
£14.40 Ex Tax: £12.00
#0391
Brake drum screws (pair)
Brake drum screws (pair).. .. more info
£3.60 Ex Tax: £3.00
#0395-03
Half-shaft bearing shim (3 thou)
3 thou shim for hub bearing preload.. .. more info
£3.48 Ex Tax: £2.90
#0395-05
Half-shaft bearing shim (5 thou)
5 thou shim for hub bearing preload.. .. more info
£3.60 Ex Tax: £3.00
#0395-10
Half-shaft bearing shim (10 thou)
10 thou shim for hub bearing preload.. .. more info
£3.72 Ex Tax: £3.10
#0395-30
Half-shaft bearing shim (30 thou)
30 thou shim for hub bearing preload.. .. more info
£3.84 Ex Tax: £3.20



















































