Front-end Fittings
Sunbeam Alpine & Tiger:
#0002
Number plate bracket (black)
Front number plate bracket, revised design for close replica of original with adjustable end bracket.. .. more info
£45.60 Ex Tax: £38.00
-245x200.product_listing.jpg "Number plate bracket buffers")
#0002MB
Number plate bracket buffers
Reproduction flexible mount buffers for the front number plate bracket .. .. more info
£40.80 Ex Tax: £34.00
#0002SS
Number plate bracket (stainless)
Stainless steel front number plate bracket, close replica of original design, but lightweight and sh.. .. more info
£46.80 Ex Tax: £39.00
#0008
Stainless steel expansion tank straps (pair)
Header tank straps in stainless steel.. .. more info
£43.20 Ex Tax: £36.00
#0008B
Black expansion tank straps (pair)
Original design power-coated black header tank straps.. .. more info
£36.00 Ex Tax: £30.00
#0062
Tiger bulkhead grommets (additional set)
Tiger bulkhead grommets (additional set).. .. more info
£14.28 Ex Tax: £11.90
#0088
Heater matrix cover gasket
Heater matrix cover gasket.. .. more info
£5.76 Ex Tax: £4.80
#0088S
Heater matrix cover screws (set of 8)
8 stainless steel 10-32 UNF slotted screws and washers.. .. more info
£8.10 Ex Tax: £6.75
#0093
Motif badge and front letter clips (10)
Motif badge and front letter clips (10).. .. more info
£4.80 Ex Tax: £4.00
#0105
Lower grill finisher fixings (pack of 4)
Round 'Tuckers' moulding clips for the lower grill trim.. .. more info
£5.40 Ex Tax: £4.50
-245x200.product_listing.jpg "Lower grill finisher screw fixings (pack of 4)")
#0105A
Lower grill finisher screw fixings (pack of 4)
Alternative screw down fixings for the lower grill trim.. .. more info
£7.20 Ex Tax: £6.00
#0111
Grill centre bar (left)
Grill centre bar (left).. .. more info
£20.76 Ex Tax: £17.30
#0112
Grill centre bar (right)
Grill centre bar (right).. .. more info
£20.76 Ex Tax: £17.30
#0119
Duckbill drain moulding
Duckbill drain moulding for the heater matrix drain (attaches to #0216 Heater matrix drain rubb.. .. more info
£13.56 Ex Tax: £11.30
#0119H
Air vent drain hose
Alpine Series V and Tiger Mk 2 air vent drain hose (correct thin-walled hose).. .. more info
£16.80 Ex Tax: £14.00
#0123BROW
Upper grill finisher (eyebrow)
Chromed reproduction grill brow trim (not concours, some slight rippling might be visible).. .. more info
£84.24 Ex Tax: £70.20
#0123REPAIR
Front brow upper repair
Front brow upper repair panel.. .. more info
£138.00 Ex Tax: £115.00
#0146
Grill centre mounting bracket
Grill centre badge mounting bracket.. .. more info
£25.32 Ex Tax: £21.10
#0147
Upper grill finisher retaining clips and nuts (pk of 8)
Upper grill finisher (eyebrow) retaining clips & nuts (pk of 8).. .. more info
£14.40 Ex Tax: £12.00
#0154
Bonnet Buffers (rubber)
1 pair of bonnet stops (2 pairs required per car).. .. more info
£16.80 Ex Tax: £14.00
#0154JKIT
Bonnet jacking kit
The bonnet jacking kit raises the rear to help remove heat from engine bay.. .. more info
£26.40 Ex Tax: £22.00
#0162
Rootes Washer bottle
Correct larger capacity (3.5 inch dia x 8 inch tall).. .. more info
£29.76 Ex Tax: £24.80
#0162T
Washer bottle
3.5 inch diameter and 8 inch tall.. .. more info
£28.80 Ex Tax: £24.00
#0182
Horn brackets (late - short)
Horn brackets (late - short).. .. more info
£9.00 Ex Tax: £7.50
#0184
Horn brackets (early - long)
Horn brackets (early - long).. .. more info
£11.40 Ex Tax: £9.50
#0216
Heater matrix drain rubber
Heater matrix drain rubber.. .. more info
£49.20 Ex Tax: £41.00
#0216H
Heater matrix drain hose
Thin walled hose for the heater matrix drain rubber to gear-box tunnel duck-bill .. .. more info
£4.20 Ex Tax: £3.50
#0256
Grommet and plug set
Grommet and plug set.. .. more info
£36.96 Ex Tax: £30.80
#0262SMALL
Chrome (small head) bumper bolts with nuts (pair)
Chrome plated bumper bolt with 3/8 UNF thread, the smaller 3/4 inch diameter dome.. .. more info
£9.60 Ex Tax: £8.00
#0277
Bonnet opening protection strip
1.44m length, light-duty protection strip for engine bay edge (upper section), as original.. .. more info
£10.80 Ex Tax: £9.00
#0288SS
Indicator and sidelight screw set
6 stainless steel screws with j-nuts for the front indicator and sidelight lens.. .. more info
£7.80 Ex Tax: £6.50
#0307
Bumper over-rider rubber buffer (each)
Bumper over-rider rubber buffer (each).. .. more info
£14.40 Ex Tax: £12.00
#0308
Bumper over-rider rubber buffer clips (pair)
Clips for fitting the rubber buffer, 2 required per over-rider.. .. more info
£2.28 Ex Tax: £1.90
#0308BOLTS
Bumper bracket bolts
Bumper bracket bolts for the front and rear .. .. more info
£9.60 Ex Tax: £8.00
#0309
Bumper over-rider rubber piping (length)
41 inches of rubber piping, enough for 4 lengths for both front and rear over-riders.. .. more info
£7.20 Ex Tax: £6.00
#0310
Bonnet stay retaining pin
For securing the bonnet stay in the bonnet when open.. .. more info
£1.20 Ex Tax: £1.00
#0316
Bracket for bonnet stay rubber
Bracket for bonnet stay rubber.. .. more info
£5.40 Ex Tax: £4.50
#0329
Inner wing bar to bulkhead shim
0.8mm (1/32 inch) stainless steel shim.. .. more info
£4.20 Ex Tax: £3.50
#0330
Bonnet hinge shim
A 1.5mm thick stainless steel shim to raise the bonnet .. .. more info
£4.74 Ex Tax: £3.95
#0331
Horn hole covers
0.8mm (1/32 inch) stainless steel covers for horn holes either side of radiator to reduce recirculat.. .. more info
£26.40 Ex Tax: £22.00
#0365
Grill centre badge surround
Chrome plated reproduction grill centre badge surround.. .. more info
£81.60 Ex Tax: £68.00
#0365B
Grill centre badge insert
Center badge insert for grill.. .. more info
Contact us for price and availability
